Arc Form with Closed Chimney-Burnished Copper Arc Form design hood has a closed chimney. Designed and specified by the architect to rear vent, rather than colliding with the ridge beam were the hood to continue to the ceiling.
Arc Form in Extreme Traditional - Brushed Stainless The Arc Form island hood is the focal point inside this kitchen, and holds a more discrete profile when viewed from the living room.
Custom Under-cabinet Hood - Brushed Stainless & Polished Brass This custom stainless hood design becomes one with the kitchen look by adding bands, apron and utensil rail of polished brass.
Classic Wall Mount Hood - Burnished Copper The warmth of the hood's burnished copper finish is in perfect harmony with this kitchen.
Classic Wall Mount Hood - Brushed Stainless The traditional feel of the Classic hood nicely complements the kitchen design. Note the subtle reflection of the white brick in the flawless finish of the hood's chimney.
Craftworks Wall Mount Hood - Brushed Stainless The designer chose to vent the hood out the rear to avoid compromising the look were it to exhaust vertically to the ceiling.
The Heritage of Luna - Brushed Stainless The more contemporary look of our Luna design, melded beautifully into this kitchen by Heritage Custom Cabinetry™.
Abbaka Original island hood Built in one piece, this Abbaka Original island hood reaches nearly 18' to the ceiling. Current record high ceiling is 31'.
Abbaka Original design in polished copper Abbaka Original design in polished copper with optional utensil rail in polished brass.
Abbaka Original design in mirror polished stainless steel Abbaka Original design in mirror polished stainless steel with optional polished brass utensil rail.
Abbaka Original Island Hood - Polished Copper Abbaka Original design island hood in 14'ceiling with chimney cut to match ceiling pitch.
Arc Form Island Hood with Extended Chimney-Stainless Steel All Abbaka hoods used in high ceilings are built with the structural integrity necessary to allow them to completely bare their own weight.
Arc Form Wall Hood - Polished Brass Arc Form design of seamlessly welded brass polished to a mirror finish.
Arc Form with Front Mount Utensil Rail Arc Form Wall Hood with optional contrasting polished stainless steel riveted bands and front mount utensil rail.
Arc Form with Rivets, Bands & Finials - Antique Copper Arc Form design is adorned with hand-riveted bands and hand formed pyramid shape finials. Pure copper has been chemically aged and sealed.
Arc Form Wall Hood with Riveted Bands - Stainless Steel Arc Form design with hand riveted bands and polished brass utensil rail add a more traditional feeling.
Barrel Form Wall Hood with Closed Flue - Polished Brass To avoid breaking the crown molding, the hood is exhausted for the rear. A custom radiused closed chimney finishes the hood.
Barrel Form Wall Hood with Closed Flue - Polished Brass To protect the highly tarnish-sensitive brushed copper surface, our matte lacquer top coat is added to seal the finish. Brushed stainless utensil rails end shelves add real functionality.
Classic Wall Hood - Antique Bronze Classic hood design in antique finish, chemically aged for an "oil rubbed bronze" look, sealed with protective top coat.
Craftworks Wall Hood - Polished & Brushed Stainless The Craftworks design is a perfect alternate to the plaster or mantle hood. Optional hand set rivets have been added the hood's apron and contrasting mirror polished and brushed stainless finishes emphasize the raised center plate.
Craftworks - Burnished Copper Craftworks design in Abbaka's Burnished Copper antique finish. Optional hand set round head rivets add a touch of old world.
Facets Wall Hood with Brass Utensil Rail - Stainless Steel Facets hood design in brushed stainless steel with optional front mount polished brass utensil rail.
Gemstone Wall Hood - Brushed Copper Gemstone Wall Hood in brushed copper finish with no tarnish matte lacquer top coat. Polished stainless steel bands decorate the hood's apron.
Gemstone Island Hood - Stainless Steel Gemstone hood design where 8 individual stainless steel plates are fusion welded into a 1-piece seamless hood.
Custom Low Profile 'Dansk Form' - Stainless Steel This adaptation creates a more sleek version of the Abbaka Original. To allow this 6 1/2' wide hood to meet the needs of the professional range top and wok, it's powered by the brawny 1400 CFM Hy-Ex remote ventilator.
Custom Abbaka Island With Exposed Duct Cover Custom Abbaka Original Island Hood with unconventional exposed custom stainless steel duct cover. The kitchen center is the center of the home.
Custom Belle-Aire Design - Stainless Steel This custom design, formerly known as Belle-Aire is an adaptation of Abbaka's Classic design. Polished stainless bands highlight the gentle front curve of the hood's canopy.
Custom Wall Hood - Hammered Antique Nickel Custom design with hand hammered, finely peened surface, then nickel plated, chemically antiqued and coated with non-tarnishing matte lacquer
Custom Scalloped Design - Stainless Steel & Brass Unique island design hood with straight front on the hood body's "cooking side" and rounded back over the island to accent the scallops. Brushed stainless is combined with polished brass.
Custom Oversized Under Cabinet Hood - Stainless Steel Custom hood design is oversized for dramatic effect. Brushed stainless hood body is accented by polished stainless apron and top trim and fitted with convenient utensil rail.
Custom Wall Mount Hood in Antique Copper Custom design adorned with standing ribs and hand-formed metal molding, as if from the work ship of an old world metal smith.